Part name: Automotive General Purpose Pressure Sensor
Description:
Eltek general purpose pressure sensor is suitable for measuring relative or absolute pressure of media present in the most sophisticated vehicle systems. Suitable for PC-LD and MD-HD applications. Chemical resistance to the medium is guaranteed by means of approved materials. The sensitive element is a ceramic element capable of detecting relative or absolute pressure, integrating a signal conditioning IC, which is directly assembled on the sensor. All the active and sensing electonic circuits are not in contact with the medium and they are separated from the medium by a ceramic membrane. The sensor output is ratiometric with the power supply. Calibration procedure, fault conditions management, ESD and EMI requirements are guaranteed by means of an approved IC according to automotive standards.
General characteristics:
  • Temperature compensated (3 points)
  • Pressure compensated (2 points)
  • Custom calibration by conditioning IC
  • Analog or digital output
  • Automotive designed
  • HV, RP and short circuit protection
  • Safety and diagnostic functions
  • Long term stability
  • Low power consumption
  • Piezoresistive technology (thick film)
  • Real time measure
  • Electric custom connection
  • Custom hydraulic port (stailess steel)
ADD TO MYPDF
TECHNICAL DRAWING
Technical data:
Accuracy ± 1,5% F.S. 0°C... 110°C
± 3% F.S. -40°C...0°C
± 3% F.S. +110°C...+140°C
Pressure Range Cells for absolute and differential pressure measures available:
2 bar f.s.; 5 bar f.s.; 10 bar f.s.; 20 bar f.s.; 50 bar f.s
Max Continuous Pressure 2x f.s.
(for istance 20 bar with cell 10 bar f.s.)
Burst Pressure 2,5x f.s.
(for istance 25 bar with cell 10 bar f.s.)
Operating Voltage (nominal) 5.0 ± 0,25 V
Maximum Voltage -18V....+32V
ESD (ISO 10605): ± 15KV Air discharge
± 8KV Direct contact
Diagnostic Functions output goes above 4,75V and/or below 0,3V in case of failure
Supply Current < 10 mA
Output Voltage (Vout) 0,5V....4,5 V ratiometric
Digital Standard I2C
Digital Custom OWI
Response Time from 10% to 90% <10 ms
Temperature Range -40°C....+140°C
(+150°C for 5 min)
Insulation Resistance min 10 MΩ
Medium Different oils; Fuel (gasoline, diesel, biodiesel, ethanol, etc.); Air; Exhaust gas; Automotive additives